Single Speed Syringe Pump

PHM-100
Single Speed Syringe Pump
(Standard Speed 3.33 RPM)

We refer to this as the 'Volkswagen' pump — thousands have been used successfully for self administration studies. The standard speed of the PHM-100 is 3.33 RPM but other motors are available and can be changed by the user. The PHM-100 pump is activated by a MED-PC ^® 28 volt output and turned on as long as the output is on. Thus the time on determines the dose. A safety stop switch disconnects power from the motor when the end of the syringe has been reached.

Features
• Flow Rates: 0.017 ml/hr to 24.122 ml/min
• Syringes: Plastic or glass, 50ml to microliter
• Amluracy: Within .5%
• Repeatability: 0.50%
• Construction: Stainless steel & aluminum frame  
• Size: 3.25" H × 3.25" W × 9" L  (8.3 cm × 8.3 cm × 22.9 cm)

Infusion Rates
The PHM-100 can accommodate plastic or glass syringes ranging from a 50ml syringe to a microliter syringe. Listed below are the stock motors and their corresponding flow rates for a multifit syringe. Other motor speeds may be specially ordered. To determine flow rates with other syringes, a calibration sheet is included with every pump.

< back to top>