Interface Power Supplies

SG-500
Rack Mount 28 Volts, 3 A DC Power Supply

SG-502
Rack Mount 28 Volts, 6 A DC Power Supply

SG-503
Rack Mount 28 Volts, 10 A DC Power Supply

SG-504
Rack Mount 28 Volts, 16 A DC Power Supply

Order any one of the above power supplies when a rack mount system is preferred or when an interface chassis is not needed, for example to power cubicle lights and fans in non-MED-PC® applications. Use as is, in a relay rack (SG-400) or enclosed in a rack mount enclosure (SG-6500, SG-6501, or SG-6502). Multiple sets of polarized Molex® connectors are provided for convenient connection. Order SG-500A, SG-502A, SG-503A, or SG-504A respectively for 230V, 50 Hz operation. Each is engineered for maximum system safety with built-in output current fold back protection and externally fused power lines. All units are short circuit protected.

Dimensions:
19.0" W x 5.25" H x 4.5" D
(48.3 cm x 13.3 cm x 11.4 cm)

SG-500T
28 Volt, 3 A DC Power Supply

This power supply has two individually switched outputs and two unswitched outputs. The switched outputs can be connected to accessories that need to be independently turned on and off. The unswitched outputs can be connected to accessories that are usually always on, like cubicle lights and fans. This is
a convenient way to light and ventilate sound attenuating cubicles used with open field activity, of fear conditioning.

Dimensions:
8.25" W x 9.0" D x 2.75" H
(21.0 cm x 22.8 cm x 7.0 cm)

SG-501
Power Supply 28 Volt, 1 A DC

SG-501A
Power Supply 230 Volt, 50 Hz

This compact unit is ideal for standalone interfaces connected to a single chamber. It can be used any time current requirements are minimal.

Dimensions:
6.0" W x 6.25" D x 3.5" H
(2.4 cm x 15.9 cm x 8.9 cm)

SG-506
Regulated Power Supply

SG-506A
Regulated Power Supply 230 Volt, 50 Hz

This unit provides both ±12 V DC as well as +5 V DC. It features eight individual four pin Molex® connectors. This power supply is primarily used for force lever (ENV-118) and force lickometer (ENV-251FM).

Dimensions:
9.25" W x 9.0" D x 5.75" H
(23.5 cm x 22.9 cm x 14.6 cm)

SG-590
Delayed Onset Power Strip

SG-590A
Delayed Onset Power Strip 230 Volt, 50 Hz

By connecting 28 V DC power supplies, pumps, and other critical components to this device, power is not restored to these items until a preset time has elapsed or a manual reset is pressed. A timed/manual switch permits permanent suspension of a system until an attendant intervenes. Use this device to protect animals and 28 V DC accessories.

Dimensions:
5.0" W x 6.0" L x 4.0" H
(12.7 cm x 15.2 cm x 10.2 cm)

< back to top>