Interface & Power Supply Cabinets

SG-6080D
Small Tabletop Cabinet and Power Supply

This tabletop interface cabinet is the most popular cabinet for labs that will not exceed more than 8 test chambers and do not require optional modules such as the Programmable Audio Generator (ANL-926). It is the most compact and least expensive unit available. It provides the equivalent of a SG-6080C Interface Cabinet and an SG-502 power supply.

Specifications:
Cabinet Dimensions: 9.25" W x 15.0" D x 5.6" H
(23.5 cm x 38.1 cm x 14.2 cm) 
Capacity: Nine single width panels

Power Specifications: 
Input Voltage: 115 V AC @ 4.0 A or 230 V AC @ 2.0 A
Input Frequency: 50/60 Hz

Output Voltages (Tolerance): Ripple and Noise:
+5 Volts @ 4.4 A (± 2%) 100 mV
+15 Volts @ 1.8 A (± 6%) 120 mV
-15 Volts @ 0.9 A (± 6%) 120 mV
+28 Volts @ 6.0 A (± 1%) 200 mV

Operating Temperature: 0-50 degrees C
Built-in EMI Filter 
Short Circuit Protected

< back to top>

SG-6510D
Large Tabletop Cabinet and Power Supply

This interface cabinet is the largest available with the capacity and power to support up to sixteen chambers running on SmartCtrlT modules, or eight SmartCtrlT modules with eight Programmable Audio Generators (ANL-926). MED Associates' interface cabinets have always contained DC power supplies for interface modules, aversive stimulators, audio generators and other component modules. Like the SG-6080D, this unit combines the 28 V DC power supply with the other supplies in one convenient tabletop enclosure. For rack mounted applications see the SG-6010 and for individual rack mount power supplies, see ENV-500, ENV-502, ENV-503, or ENV-504. Connections to the 28 V DC supply in this unit are made from convenient two pin polarized Molex^® connectors on the front panel. 

Specifications:
Cabinet Dimensions: 19.0" W x 15.0" D x 5.6" H
(48.3 cm x 38.1 cm x 14.2 cm) 
Capacity: Seventeen single width panels

< back to top>

SG-6080C
Tabletop Interface Cabinet

The SG-6080C Cabinet shown below is virtually identical to the SG-6080D without the 28 Volt Supply. Use for aversive stimulation modules as shown or for interface applications with standalone power supplies. These components must be ordered separately.

Specifications:
Cabinet Dimensions: 9.0" W x 11.75" D x 8.0" H
(22.9 cm x 29.8 cm x 20.3 cm)
Capacity: Nine single width panels

< back to top>

SG-6010
Rack Mount Interface Chassis and Heavy Duty Power Supply

This rack mounted unit has the same module capacity as the SG-6510D without the built in 28 Volt Supply. See ENV-500, ENV-502, ENV-503, or ENV-504 for rack mount 28 V DC power supplies, if needed. This cabinet will support up to 4 aversive stimulator packages using the ENV-410B, ENV-412, and ENV-413 modules.

Specifications:
Cabinet Dimensions:
19.0" W x 5.25" H x 12.0" D
(48.3 cm x 13.3 cm x 30.5 cm) 

Capacity: Eighteen single width panels

< back to top>

SG-6500
Single Rack Mount Enclosure

This attractive heavy duty blue metal enclosure will house any single rack mount chassis with Med Associates' interface, physiological, aversive stimulation, audio, or special purpose modules, or a rack mount 28 V DC power supply. It improves the appearance of any lab, while protecting the ventilated rack mount chassis. It elevates the module front panel for easier monitoring of front panel controls, meters, connectors, and LED indicators. The single enclosure unit measures: 19.5" W x 5.625" H x 15.0" D (49.5 cm x 14.3 cm x 38.1 cm).

< back to top>

SG-6501
Double Rack Mount Enclosure

This unit is identical to the SG-6500, except it measures 10.75" (27.3 cm) high to accommodate up to two rack mount units. Ideal for one interface cabinet plus one 28 V DC power supply.

< back to top>

SG-400
Relay Rack

A conventional gray table top relay rack with 28.0" (71.1 cm) of front panel space that holds up to four standard rack mount units.

< back to top>