| |
ENV-007CT: Modular Test Chamber with Modified Top |
| |
This is our turnkey system for doing intermittent home cage infusions in catheterized rats. Permanently attached tethers have
been found to remain trouble free for longer periods of time when given periodic infusions with saline in the home cage. Up
to three individually housed rats can be infused from a single syringe pump loaded with three syringes. The MED-125CT
package includes six PHM-125A plastic home cages. Three of these are used to hold animals at any point in time, while the
additional three cages serve as backups to have on hand for routine cage changes. The top lid of the PHM-125A home cage
features a slot and hole allowing the tether system to exit the cage, and the lid is held on the cage using slots and screws.
This mechanism allows secure housing of the animal, while facilitating removal with the leash attached to the animal when
experiment time comes. The PHM-110 drug delivery arm assembly is a counter balance to support the swivel and leash
assembly. We have also included three PHM-119 quick disconnect drug delivery assemblies. The PHM-102 Triple Infusion
Pump with Automatic Cycling Timer infuses up to three animals at the same time. A pair of two digit thumb-wheel switches
are used to set a cycle time from 1 to 99 minutes and an infusion time from 1 to 99 seconds. A setting of 60 and 10, for
example, will produce a ten second infusion at one hour intervals. Other features include a flush push button, test mode,
single injection mode, and indicator lights that identify cycle activation and infusion activation.
|
| |
ENV-008CT: Modular Operant Test Chamber with Drug Infusion Top |
| |
An ENV-008 chamber with modified top for drug delivery studies.
The top modification consists of a 2.0" (5.1 cm) diameter hole
in the center with a 0.25" (6.4 mm) access slot cut from the
hole to the front edge. This allows the user to place an animal
in the test chamber with a drug delivery leash, or other harness
system, attached. Contact Sales for custom top modifications.
The ENV-008 chamber itself is a standard height chamber
that features a working area of 12.0" L x 9.5" W x 8.25" H
(30.5 cm x 24.1cm x 21.0 cm). Both end walls are identical
with three sturdy aluminum channels designed to securely hold
modular components. The unique top design with a clear polycarbonate
center and two hinged stainless steel flap makes changing modules quick and easy,
while holding them securely. This unit includes a door and rear panel of 0.22" (5.6 mm) clear
polycarbonate, and a base of 0.5" (1.3 cm) thick, white polypropylene 21.0" L x 13.75" D (53.3 cm x
34.9 cm). |
| |
ENV-307A/ENV-307CT: Modular Operant Test Chamber with Drug Infusion Top |
| |
The size of the ENV-307A mouse operant conditioning chamber was first
proposed by Galen Wenger and Peter Dews. An advantage of this size over
our other chamber sizes is the smaller area provides less distractions for the
mouse thus improving shaping and performance.
This modular mouse chamber features three 1.5" (38.1 mm) wide channels
on both end walls for easy and convenient placement of any mouse
accessory, including nose pokes, ultra-sensitive standard levers, stimulus
modules, and reinforcement devices. The cage unit is mounted on a
durable, easily cleaned 0.50" (1.3 cm) white polypropylene base that measures 16.0" x 11.5" (40.6 cm x 29.2 cm). The front,
back, and top are constructed of 0.22" (5.6 mm) polycarbonate. The animal work space measures 6.25"L x 5.5"W x 5.0"H
(15.9 cm x 14.0 cm x 12.7 cm). The front loading door of this unit folds down, leaving an extra high lip to restrain the animal
until removed. The top of this chamber features the "CT" modification for self administration studies. The top modification
consists of a 2.0" (5.1 cm) diameter hole in the center with a 0.25" (6.4 mm) access slot cut from the hole to the front edge.
This allows the user to place an animal in the test chamber with a drug delivery leash, or other harness system, attached.
Contact Sales for custom top modifications. |
| |
ENV-307W/ENV-307CT: Modular Operant Test Chamber with Drug Infusion Top |
| |
This chamber represents a preferred design for all mouse operant testing. The chamber dimensions are 8.5" L x 7" W x 5" H
(21.6 cm x 17.8 cm x 12.7 cm). The durable and easily cleaned base is 0.5" (1.3 cm) thick white polypropylene and measures
21" L x 13.75" D (53.3 cm x 34.9 cm). The front, back, and top are constructed
of 0.22" (5.6 mm) polycarbonate. The front loading door of this unit folds down,
leaving an extra high lip to restrain the animal until removed. The top has been
modified with a 2.0" (5.1 cm) diameter hole in the center with a 0.25" (6.4 mm)
access slot cut from the hole to the front edge. This allows the user
to place an animal in the test chamber with a drug delivery
leash, or other harness system, attached. Contact Sales for
custom top modifications. |
| |
PHM-110: Arm Assembly with Gimbal Ring |
| |
The arm assembly includes an aluminum block for mounting on most test
chambers. The back plastic wall on Med Associates' chambers with the "CT"
extension in the model number (eg: ENV-008-CT) can be pre-drilled for this
block, or it can be mounted on a modular panel. The adjustable post extends
up to 8.0" (20.3 cm) above and 7.0" (17.8 cm) over the center of the chamber
with a pivot-arm and dual action gimbal. An adjustable counter balance
weight maintains sufficient tension to keep the leash assembly away from the
test animal. A standard PHM-115F1 gimbal measuring 0.386" (9.8 mm) inside
diameter is available to fit the PHM-119-2 swivel. The optional gimbal
measures 0.75" (1.9 cm) inside diameter for the PHM-115 swivel assembly
(sold separately). |
| |
PHM-119B: Rat Self Infusion Package |
| |
Includes:
- PHM-119-1: Quick Connect™ Harness
- PHM-119-2: Quick Connect™ Swivel
- PHM-119-3B: Quick Connect™ Tether (12')
- PHM-119-4B: Delivery Tubing
|
| |
PHM-119-1: Quick Connect™ Harness |
| |

- Luer Attachments for Easy Access to the Catheter
- Secure Leak Free Tether Connection
- Harness is Well Tolerated by the Animal
|
| |
PHM-119-2 : Quick Connect™ Swivel |
| |

- Friction Fit-Free Luer Connections
- Leak Free Connection
- No Extra Loops that the Animal Can Grab
- Quick Connect™ and Disconnect
|
| |
PHM-119-3A/PHM-119-3B : Quick Connect™ Tether |
| |
Male/Male Luer Tether
- Worry Free Luer Connection
- Stainless Steel Spring Tether to Protect the Integral Polyurethane Line
- Quick and Easy Connection Between the Swivel and Harness
- PHM-119-3A: 8" Length; PHM-119-3B: 12 " Length
|
| |
PHM-119-4 : Delivery Tubing |
| |

- 60" with Male/female Luer Lock Connections
- Connects Syringe Pump to Swivel
- Dead Space Volume: 1.4ml
|