 |
This alternative response device is mounted on a 3/8 size rat modular panel and has a 1.0" (2.5 cm) access hole which is bisected by a sensitive infrared detector placed 0.25" (0.64 cm) in from the front edge. The control amplifier operates on 28 V DC and produces a ground output whenever the beam is broken. The back of the unit contains a stimulus display made up of three colored LEDs (red, green, yellow).
Dimensions:
Panel: 3.0" W x 4.875" H (7.6 cm x 12.4 cm)
This alternative response device is mounted on a 3/8 size rat modular panel and has a 1.0" (2.5 cm) access hole which is bisected by a sensitive infrared detector placed 0.25" (0.64 cm) in from the front edge. The control amplifier operates on 28 V DC and produces a ground output whenever the beam is broken.
Dimensions:
Panel: 3.0" W x 4.875" H (7.6 cm x 12.4 cm)
|
 |
This alternative response device has a single yellow stimulus light at the back of the nose poke opening and is mounted on a 3/8 size modular panel. It has a 1.0" (2.5 cm) access hole which is bisected by a sensitive infrared detector placed 0.25" (0.64 cm) in from the front edge. The control amplifier operates on 28 V DC and produces a ground output whenever the beam is broken.
Dimensions:
Panel: 3.0" W x 4.875" H (7.6 cm x 12.4 cm)
|
 |
This unit includes a yellow LED stimulus light at the back of the access port, and an I/R control, source and detector. This response device is mounted on a 1/2 size mouse modular panel. The access port measures 0.5" (1.3 cm) in diameter by only 0.4" (1.0 cm) deep. Entry of the animal’s nose 0.25" (0.64 cm) into this area defines the response. The control amplifier operates on 28 V DC and produces a ground output whenever the beam is broken.
Dimensions:
Panels: ENV-313W: 2.355" W x 3.5" H (6.0 cm x 8.9 cm)
ENV-313M: 1.5" W x 3.5" H (3.8 cm x 8.9 cm)
|
 |
This mouse nose poke module features individually controlled red, yellow and green LED’s mounted flush to the back of the access port, and an I/R control to detect nose pokes. The access port opening is 0.5" (1.3 cm) in diameter by 0.4" (1.0 cm) deep. Entry of the animal’s nose 0.25" (0.6 cm) into the opening will register a count. The operating voltage of this device is 28 V DC. This device is mounted on a 1/2 size mouse modular panel.
Dimensions:
Panels: ENV-313W: 2.355" W x 3.5" H (6.0 cm x 8.9 cm)
ENV-313M: 1.5" W x 3.5" H (3.8 cm x 8.9 cm) |
 |
This mouse pecking key features a 5/8" (1.6 cm) diameter nose poke hole with opaque white plastic backlit target. It is mounted on a 3/4 size mouse modular panel. The standard backlight color is yellow, however other colors are available upon request. The force required to operate the key is factory set to 3 grams.
Dimensions:
Panels: ENV-316W: 2.355" W x 5.25" H x 1.25" D
(6.0 cm x 13.3 cm x 3.2 cm)
ENV-316M: 1.5" W x 5.25" H x 1.25" D
(3.8 cm x 13.3 cm x 3.2 cm) |
 |
This rodent pecking key features a 1" (2.5 cm) diamter nose poke hole with opaque plastic backlit target. It is mounted on a 3/8 size rat modular panel. The standard backlight color is yellow, however other colors are available upon request. The force required to operate the key is factory set to 15 grams. This key fits into any of our 007, 008 and 009 series modular test chambers.
Dimensions:
Panels: 3.0" W x 4.875" H (7.6 cm x 12.4 cm) |
 |
The large rodent pecking key features a 2" (5.1 cm) diamter nose poke hole with opaque plastic backlit target. It is mounted on a 3/8 size rat modular panel. The standard backlight color is yellow, however other colors are available upon request. Perfect for guinea pigs. The force required to operate the key is factory set to 15 grams. This key fits into any of our 007, 008 and 009 series modular test chambers.
Dimensions:
Panels: 3.0" W x 4.875" H (7.6 cm x 12.4 cm) |
Operant Behavior