|
Standard Modular Chamber
| Each modular test chamber includes a stainless steel waste pan; the corresponding grid floor is sold separately. |
 |
This standard height chamber is recommended for most rodent work. Both end walls are identical with three sturdy aluminum channels designed to securely hold any modular component. The unique top design with a clear polycarbonate center and two hinged stainless steel flap makes changing modules quick and easy, while holding them securely in place. This unit includes a door and rear panel of 0.22" (0.6 cm) clear polycarbonate, and a base of white polypropylene.
Dimensions:
Base: 21.0" L x 13.75" D x 0.50" H
(53.3 cm x 34.9 cm x 1.3 cm)
Interior: 12.0" L x 9.5" W x 8.25" H
(30.5 cm x 24.1 cm x 21.0 cm)
Exterior: 12.5" L x 10" W x 10.5" H
(31.8 cm x 25.4 cm x 26.7 cm) |
Value-Pak Modular Test Chamber
 |
This unit provides a lower cost alternative to the standard modular test chamber (ENV-008). The difference is that the hinged top of the ENV-008 has been replaced by a solid clear polycarbonate top that is screwed in place. Instead of opening a flap to change components you must now remove the top to change components.
Dimensions:
Base: 21.0" L x 13.75" D x 0.50" H
(53.3 cm x 34.9 cm x 1.3 cm)
Interior: 12.0" L x 9.5" W x 8.25" H
(30.5 cm x 24.1 cm x 21.0 cm)
Exterior: 12.5" L x 10" W x 10.5" H
(31.8 cm x 25.4 cm x 26.7cm)
|
Drug Administration
 |
Modular Operant Test Chamber
with Modified Top
This chamber is typically used for drug self administration studies. By combining it with an extra tall sound attenuating cubicle, you will be guaranteed sufficient space for a counter balance arm and drug delivery swivel. The top modification consists of a 2.0" (5.1 cm) diameter hole in the center with a 0.25" (0.6 cm) access slot cut from the hole to the front edge. This allows the user to place an animal in the test chamber with a drug delivery leash, or other harness system, attached. This standard height chamber is recommended for most rodent work. Both end walls are identical with three sturdy aluminum channels designed to securely hold any modular component. The unique top design with a clear polycarbonate center and two hinged stainless steel flap makes changing modules quick and easy, while holding them securely in place. This unit includes a door and rear panel of 0.22" (0.6 cm) clear polycarbonate, and a base of white polypropylene.
Dimensions:
Base: 21.0" L x 13.75" D x 0.50" H
(53.3 cm x 34.9 cm x 1.3 cm)
Interior: 12.0" L x 9.5" W x 8.25" H
(30.5 cm x 24.1 cm x 21.0 cm)
Exterior: 12.5" L x 10" W x 10.5" H
(31.8 cm x 25.4 cm x 26.7 cm)
|
 |
Cover Insert for Drug Infusion Tops
Use this clear polycarbonate cover when not using an infusion tether to prevent animals from exploring the opening in the top. This cover will fit all standard drug infusion rat chamber tops. Simply slide onto chamber top and it is locked in place by the door.
Dimensions:
2.5" x 6.0" (6.4 cm x 15.2 cm)
Special Note:
One cover is included with each rat modular test chamber with drug infusion top.
< back to top> |
|
Operant Behavior