Modular Mouse Chamber and Accessories

ENV-307W
Wide Mouse Modular Test Chamber

This wide mouse modular test chamber is on a durable and easily cleaned base of white polypropylene. The front, back, and top are constructed of 0.22" (0.56 cm) polycarbonate. The front loading door of this unit folds down, leaving an extra high lip to restrain the animal until removed.

Dimensions:
Base: 21" L x 13.75" D x 0.50" H
(53.3 cm x 34.9 cm x 1.3 cm)
Interior: 8.5" L x 7.0" W x 5.0" H
(21.6 cm x 17.8 cm x 12.7 cm)
Exterior: 9.5" L x 8.0" W x 7.25" H
(24.1 cm x 20.3 cm x 18.4 cm)

ENV-307W-CT
Wide Mouse Modular Test Chamber with Drug Infusion Top

This chamber is used for mouse studies using drug self-administration. The top modification consists of a 1.5" (3.8 cm) diameter hole in the center with a 0.25" (0.64 cm) access slot cut from the hole to the front edge. This allows the user to place an animal in the test chamber with a drug delivery leash or other harness system, attached.

This wide mouse modular test chamber is on a durable and easily cleaned base of white polypropylene. The front, back, and top are constructed of 0.22" (0.56 cm) polycarbonate. The front loading door of this unit folds down, leaving an extra high lip to restrain the animal until removed.

Dimensions:
Base: 21" L x 13.75" D x 0.50" H
(53.3 cm x 34.9 cm x 1.3 cm)
Interior: 8.5" L x 7.0" W x 5.0" H
(21.6 cm x 17.8 cm x 12.7 cm)
Exterior: 9.5" L x 8.0" W x 7.25" H
(24.1 cm x 20.3 cm x 18.4 cm)

ENV-307CT
Chamber Top Modification

This chamber top modification may be added to any ENV-307W making it suitable for drug self infusion studies.

< back to top>

ENV-307W-GF
Modular Mouse Grid Floor - Wide
(see below for ENV-307A floor)

This stainless steel grid floor features twenty-four 0.13" (0.32 cm) rods, placed on 0.31" (0.79 cm) centers mounted in clear polycarbonate supports. Order additional floors to simplify routine cleaning and maintenance. To use a contact lickometer or scrambled grid floor aversive stimulator with the wide mouse modular test chamber you will also need the quick disconnect harness (ENV-307W-QD).

Dimensions:
7.0" L x 6.0" W x 2.25" H (17.8 cm x 15.2 cm x 5.7 cm)

Click here for additional information.

< back to top>

ENV-307W-FP
Filler Panel Package

Filler panels are used to close those spaces not occupied by chamber components on the wide mouse modular test chamber. A filler panel package is required with all initial orders of modular test chambers. This includes assorted sizes as needed and may be supplied at no cost depending on the accessories ordered at the same time. All panels are 2.36" (6.0 cm) wide. The panel height may be specified as follows:

< back to top>