Cage Speakers and Tweeters

ENV-224AM
Cage Speaker with Cable

This unit consists of a 3.5" (8.9 cm) speaker mounted on a ¼ size modular panel. Use with the Programmable Audio Generator (ANL-926) or other white noise or audio amplifiers. The recommended range for pure tone applications is 1.0 to 7.0 KHz. At 700 Hz and 7.5 KHz the audio signal is approximately 10 dB down. This unit is also available with a cubicle ceiling mount bracket designed to hold both the speaker and optional light (ENV-224CM). 

< back to top>

ENV-324W 
Cage Speaker - Mouse

A small 2.0" (5.1 cm) eight ohm speaker on a modular mouse panel with 25' (7.6 meter) cable terminating in a 0.125 (3.2 mm) phone jack. Use with the Programmable Audio Module (ANL-926) for white noise, pure tone, or clicks. The recommended range for this unit is 1.0 to 5.5 KHz. At 700 Hz and 6.5 KHz, the audio signal is approximately 15 dB down.

< back to top>

ENV-224BM
Cage Tweeter with Cable

This horn tweeter is supplied on a modular panel for those applications where higher frequency pure tone stimulation is required. Use with Programmable Audio Generator (ANL-926) or other audio amplifiers with an 8 ohm output. The recommended range for this unit is 5 to 15 KHz. At 2 KHz and 18 KHz the audio signal is approximately 10 dB down.

< back to top>

ENV-224CM
Cage Tweeter with Cable

This is the same speaker used in the ENV-224AM with a bracket to mount it to a cubicle ceiling. The bracket is designed to hold both the speaker and an optional light (ENV-221M).

< back to top>

ENV-224DM
Cage Tweeter with Cable

This super tweeter may be mounted to the ceiling of any MED Associates' modular test chamber. Use with the Multiple Tone Generator (ENV-223), Programmable Audio Generator (ANL-926), or other audio amplifiers with an eight ohm output. The recommended range for this unit is 5 to 40 KHz. At 3 KHz and 45 KHz the audio signal is approximately 10 dB down.


< back to top>