 |
Programmable Audio Generator
This programmable audio generator is a single width module that contains a pure tone, white noise, and click generator under a single microprocessor controller and audio amplifier rated at 675 mW max into 8 ohms. Install into the interface cabinet for each test chamber in the system. The frequency and amplitude specifications may be limited by the cage speaker.
Dimensions:
0.875" W x 5.25" H x 7.25" D
(2.2 cm x 13.3 cm x 18.4 cm)
Specifications:
Pure Tone:
Frequency: 10 to 35,000 Hz in 1 Hz increments.
Amplitude: 20 to 100 dB in 0.5 dB increments
± 1 bit (0.125 dB).
Rise/Fall time: 1 milliseconds to 1 second in 0.1 ms increments.
Duration: 1 millisecond to over 1 minute (65,535 ms) plus
continuous (timed by MedState NotationT).
White Noise:
Frequency: Broad band white noise selected by freq = 0.
All Others: Same as pure tone.
Clicker:
Frequency: 1 to 10 Hz
Rise/Fall: Disabled.
Amplitude: Fixed.
Duration: Same as pure tone.
|
 |
This convenient multipurpose sound generator that is able to produce three different types of sound; white noise, clicks and pure tones. Sound type is selected by manually moving switches up or down. Both the volume and duration of each sound are adjustable.
Dimensions:
3.1" W x 2.7" L x 1" H
(7.9 cm x 6.9 cm x 2.5 cm)
|
 |
Multiple Tone Generator
This multiple tone generator uses four 28 V DC outputs to select between 15 different frequencies ranging from 1 KHz to 20 KHz. It employs a fixed rise/fall so there is no speaker click or pop when turning on the tones. The volume of the tones may be adjusted using a screwdriver. This may be used with speakers (ENV-224AM, ENV-224BM, ENV-224CM, ENV-224DM, or ENV-324W) depending on the application and frequencies desired. If greater control over the frequencies, rise/fall time, and volume is desired, refer to the programmable audio generator (ANL-926).
Dimensions:
2.4" W x 2.27" L x 1.0" H
(6.1 cm x 5.8 cm x 2.5 cm)
|
 |
OS Compatibility: Windows® 98, 2000, and XP
OS Compatibility: Mac OS® 9.1
This package offers a level of verification and calibration unavailable with sound level meters. The package consists of a microphone, microphone amplifier, analog-to-digital converter, USB interface, and sound pressure
level software. The software display provides detailed measurements of either noise or pure tone signals. This package is a cost-effective and accurate approach to sound level measurement.
Dimensions:
5" W x 5" D x 1.75" H
(12.7 cm x 12.7 cm x 4.4 cm)
< back to top> |
|